Can-Filter Original Classic - 50 | Pre-Filter Included

SPECIFICATIONS

CAN 50

• Max Recirculating (Scrubbing) CFM: 840 cfm / 1426 m³h
• Max Exhaust CFM: 420 cfm / 713 m³h @ 0.1 sec contact time
• Recommended Min Airflow: 210 cfm / 356 m³h
• Prefilter: Yes
• Flange: 150MM (6" Inch) / 200MM (8" Inch) / 250MM (10" Inch)
• Dimensions: (with pre-filter)
  • Outside Diameter: 42cm / 16.5"
  • Height: 50cm / 19.7"
  • Total Weight: 25kg / 55lbs.
  • Carbon Weight: 19kg / 42lbs.
  • Carbon Bed Depth: 6.5cm / 2.56"
• Max Operating Temp: 80ºC
• Pressure drop at max cfm: 180pa / .75"wg
• Recommended Fans: RS200, Max-Fan Pro 200

IN THE BOX

• [1] x Can-Filter Classic

The formula for sizing a room: Length x Width x Height Divided by 3

Gives minimum recommended fan CFM

Match fan to filter

Ex.) 10ft x 10ft x 20ft = 2000 Cubic Feet

2000 Cu.ft / 3 = 667 CFM

667 CFM fan is Minimum fan size for this size area

after establishing fan size, match it to appropriate sized filter. IE, Can-100

Every different size of filter provides a different resistance to each different size and style of fan you put on it, a filter at the maximum exhaust CFM rating has approximately 0.7 wg. pressure drop

All Fans will have a lower CFM at a higher pressure.

For Example at .5"wg

The 10" Max-Fan goes from 1019 CFM to 885 CFM,

The 12" Max-Fan would go from 1708 CFM to 1595 CFM

Approximately 3%(Straight hard cast) to 7%(Flex Ducting)

1% to 4%  Additional loss for every 90° Bend

The Can-Filters are manufactured in Beautiful British Columbia, Canada/North America

The Fans are manufactured in Germany.

The only difference is the carbon bed thickness

38 special = 2" Carbon bed

Original Can-Filter = 2.5" Carbon bed

38-Special expected life = Approx. 1 year

Original Can Filter = Approx. 1.5 Years

It is a good idea to replace the pre-filter when they become dirty because the pre filter is blocking larger dirt and dust particles from getting into the pore structure of the carbon, a dirty pre filter increases the pressure, which will decrease the flow through the filter.

Technically the filter can be re-filled, but it is not a good idea to self-fill the filters at all, the reason for this is that Can-Filters uses an industrial shaker with timed intervals and a dust extraction system, to ensure a packed carbon bed .This eliminates the possibility of preferred air channels through the filter, because as we all know, air does not wait in line to go through a filter it finds the path of least resistance and crowds in. So if you tried packing the filter yourself, as soon as you got it as full as you think you could get it, attached a fan and turned it on, the fan would vibrate the carbon, and over time the carbon would settle and you would be left with air gaps all over the place presenting the air with channels to flow through the filter and possibly leave untreated.

The maximum recommended temperature that you can run your filter at is 80°C / 176°F

Above 70% humidity the water molecules in the air start to get stuck in the carbon pore structure and slowly diminish the life of the filter.

The life of a filter is determined by the concentration of the contaminant, the relative humidity and the volume of air cleaned. Unfortunately, there is no indicator light on the filter that tells you when it is ready to be replaced. Experience with one Can-Filter will give you an expectation for future Can-Filters in your application. 

It is recommended to pull air through the filter, the reason for this is because the filters utilize the most surface area of carbon to clean the air and you use the most of the pre filter to block dirt and debris from entering your carbon pore structure. Another advantage of pulling air through the filter is that your going to have clean air running through your fan instead of air possibly laden with VOC’s, dust, and other airborne particles that could stick to the fan blades and create air resistance.

During the manufacturing process Can filters uses an industrial shaker to vibrate the filter to ensure the carbon bed is packed tight and full to the top. This process eliminates any preferential channels which would allow the odor to pass through the carbon without the proper contact time.

Can filters only uses quality activated carbon that is designed for our manufacturing process.

The CFG packed bed design filter ensures the highest quality odor control.

We recommend pushing the air through your air cooled lights to avoid overheating your fan and to create a positive air pressure in your ducting and light hoods.

Approximately 150 - 200 CFM is required to air cool a 1000W Bulb.

We warranty our fans for 5 years. Filters are warranted only against manufacturing defects.