Superpro Vapor-B1 | Humidity Control | Aus Plug

VAPOR-B1 is a controller for the moisture, which can handle a degreasing or moisturizing device. The controller can operate in different modes in light and dark period, which will be switched automatically via the built-in photocell. Adjusts easily via rotary knobs. Three illuminated indicators show the current status of the controller.

WARNING: The controller is not waterproof. Install only in places where there is no danger of getting wet.

Pictures provided are for illustration purpose only and all Superpro devices would come with standard AU plugs/sockets.

INSTALLATION:

Turn VAPOR-B1 in standard contact 220-240V. For permanent installation can be used tab at the top of the hull. Turn on the device (or devices) whose inclusion will be controlled. Observe to not exceed the limit current (10 A, approximately 2200W). In need of controlling the device (s) with greater power use relay.

MODES OF OPERATION:

Before using the controller, you must set modes - drying or moistening. Mode selection is made by using the two rotary knobs. The controller must be plugged in. To choose a mode, "DRY": turn both knobs fully left. After a few seconds the lights will begin to flash and then remain lit only indicator RH-. To select mode "HUMIDITY": turn both knobs fully right. After a few seconds the lights will begin to flash and then remain lit only indicator RH +. After selecting the mode, turn the knobs to the desired values ​​of humidity.

SETTING OF CONTROLLER:

Nagasete buttons of the desired values ​​of humidity in the bright (DAY) and dark (NIGHT) * period. Photocell automatically switches between them. When humidity exceeds the set value, the controller will supply power to the incorporation into equipment. Since the controller has the activation interval (hysteresis) from 5% RH, it will supply electricity until the humidity drops 5%. When applying a voltage, light is "OUTPUT ON" for example regime "drying". In this mode, the setting is the maximum allowable humidity. Mode "drying" - is the minimum.