Milwaukee pH600 Digital pH Pen | Single Point Calibration

Our affordable and economical line of water monitoring equipment. The Milwaukee pH600 is a compact pH tester that has manual one-point calibration. These appeal to farmers on a budget and are designed for simple use.

Use and Care

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips. 

1. Always store upright with the cap full of buffer or storage solution MA9015, not water.
2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Pen in the sample for a faster result.

• Fast, accurate results with digital LCD readout
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
• Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes
• Cap to protect the pH sensor and keep it wet when stored upright
• Low power demand for extended battery life (batteries included)

• pH range: 0.0 to 14.0 pH
• Resolution: 0.1 pH
• Accuracy: +/- 0.1 pH
• Typical EMC Deviation: +/- 0.2 pH
• Calibration: Manual, 1 Point
• Environment: 32 F to 122 F, 95% RH
• Approximate dimensions: 6 x 1.2 x 0.95 inches
• Weight: 3 ounce
• Battery Life: 700 hours